This copper wort chiller features 25′ of 3/8” copper tubing. 8′ of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.
Chugger Pump SS In-Line is a pump used for home brewing. It has a magnetic drive with base with 115v. Has 1/2 inch by 1/2 inch MPT connections and comes with a 55″ cord with plug. The stainless steel head is perfect for coming in contact with your wort. You can also connect a ball valve to the out connection to control your flow. This pump is not self priming, DO NOT forget to prime the pump first before turning on.
Stainless Steel wort chiller made from 25′ of 3/8” Stainless Steel tubing. 8′ of vinyl tubing is attached to both the in and the out with a female garden hose fitting on the “water in” side. Uprights are held together by a single hose clamp rather than welding/soldering.